That’s essentially the maximum potential of both routers, so let’s find a middle ground and check them using the Intel 8265 WiFi adapter. The results using the 2.4GHz network were also excellent, so, at 5 feet, I measured an average of 310 Mbps and, at 30 feet, it went down to 215 Mbps (both upstream). Now, I have tested the Asus RT-AX86U very recently with a compatible client and the results on both the 80MHz and 160MHz are amazing, going far above the performance of the RT-AC86U which shows the potential of this new WiFi standard (it will only get better).įrom the client to the server (5GHz, 80MHz), I got 896 Mbps at 5 feet and 608 Mbps at 30 feet, while downstream, I measured an average of 401 Mbps at 5 feet and an average of 225 Mbps at 30 feet. These are the results that I got a couple of years ago and they’re very good considering that we’re dealing with a WiFi 5 router. Keeping the same client, but switching to the 2.4GHz network, I measured an average of 173.4Mbps at 5 feet from the client to the server and an average of 208 Mbps at 30 feet. That being said, the RT-AC86U has been a great performer and, while the client was connected to the 5GHz network (the channel bandwidth set at 80MHz), I got 792Mbps at 5 feet and an amazing 740Mbps at 30 feet, upstream from the server to the client, I saw 310 Mbps at 5 feet and 240 Mbps at 30 feet. It’s also worth noting that the Asus RT-AX86U was tested using an TP-Link TX3000E WiFi adapter, while the RT-AC86U was tested using a client equipped with an Asus PCE-AC88. (First the Arc shows up in the Sonos app, then Subs and Surrounds within a minute or a few at most.) Occasionally, maybe once a month, I’ll have to reboot the Arc, too, to reconnect, but never the Sub or Surrounds.This isn’t perfect, but the hassle is minimal, and a far cry from the constant drops that I was experiencing for a while.I have tested these two routers and you can check the separate articles ( Asus RT-AC86U and the Asus RT-AX86U), but, since the WiFi 5 client that I used when checking out the throughput of the RT-AX86U was a laptop equipped with an Intel 8265, I retested the RT-AC86U with this client to be able to confront the results between the two devices. The connection to Arc is usually restored. The fix is generally easy: turn the Asus off, wait a few seconds, turn it back on. (I suggest using the latest version in the “Release” folder, not the Beta folder) Since I started this thread 3 months ago, my general experience has been that I lose connection to Sonos Arc system about once a week. The interface is almost a duplicate of Asus stock. It’s also free, which is great, though rmerlin does accept donations. If you’re not familiar with it, Merlin isn’t tweakware for tech geeks-the focus is on fixing bugs in the stock firmware, better overall stability and improving performance. I have not used stock Asus firmware in years-I always use the Asuswrt-Merlin firmware from rmerlin, and many Asus users swear by it. But that was the issue and it’s finally solved. I can’t explain why that would be a problem-I’ve always had the QoS set that way, and with gigabit service, an AX router, a modest load of wifi clients in my apartment and no gaming, there should be bandwidth aplenty. Sonos system has stayed connected ever since. On a whim, and not expecting it to help, I turned off the QoS feature, which I have set to prioritize bandwidth for media streaming over other tasks. Meanwhile, I went into the router settings once again, looking for anything that might be an issue-even though I had gone through them all with the tech rep, and these were all the same settings that had worked on the AC88U. (However: KUDOS to such extraordinary tech support!) He then escalated the issue to an appointment with the Senior Support Team. I did all the troubleshooting I could, then called into Sonos support and spent almost 2 hours with a tech rep trying every potential solution possible, but nothing worked. Meanwhile, all other wifi devices in my home worked just fine-the Sonos was the only problem child. I’d reboot and the Sonos system would connect for 10-30 minutes, then lose wifi connection again. But soon the dropped connections started. Then I recently upgraded to the RT-AX86U using same Smart Connect default settings and, initially, all seemed fine. I’ve used Asus Smart Connect with all settings at default. No problems with the S2 app and no problems when I upgraded to an iPhone 12, other than the loss of Trueplay support, which continues to be a problem. I’m posting this in hopes of saving someone else from the hours of frustration I’ve endured to resolve this issue.įrom the time I set-up my Arc + Sub + Surrounds system in July with an Asus RT-AC88U router (connected to Fios Gigabit internet) it has worked without issue.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |